Product Description

Silicon carbide tube/pipe 

 

Products Description of silicon carbide tube

SiC thermal couple protection tube is oxidation resistance, high thermal conductivity, corrosion resistance, low coefficient of thermal expansion. They can be used in metallurgy industry, chemical industry and ceramics industry. They can be used as temperature-checking protection tubes.

Silicon Carbide Pipe is made of silicon carbide as the main raw material, adding a variety of chemical wear-resistant raw materials and anti-oxidant, effectively improving the wear resistance of the product, using SiO2 micro powder as the high-temperature bonding phase, a high-performance silicon carbide products by high-temperature firing.

Silicon carbide tube has the advantages of high strength, high hardness, good wear resistance, high temperature resistance, corrosion resistance, good thermal shock resistance, high thermal conductivity and good oxidation resistance.

 

SiC thermocouple protection tube Features

1, Moulding: Cold isostatic pressing(CIP)

2, Sintering: GPSN/RSSN

3, High strength and good compactness

4, Low thermal expansion coefficient

5, Excellent thermal shock resistance

6, No wetting by molten aluminum and non-ferrous metal

7, Good corrosion resistance

 

silicon carbide tube advantage

1. Dimensional stability at high temperature, anti-deformation, high high temperature strength
2. Thermal shock resistance, wear resistance and corrosion resistance
3. Anti-oxidation and erosion resistance
Can be widely used in: electric power, steel mill slag flushing groove, coal chemical industry, mining, transmission pipeline.

Silicon carbide tube/pipe application

Silicon carbide tubes are mainly used in medium frequency forging, various heat treatment electric furnaces, metallurgy, chemical industry, non-ferrous metal smelting and other industries. Widely used in metallurgical sintering furnace and intermediate frequency heating forging furnace. Length can be designed.

 

Advantage

Silicon carbide tube with high density, impervious to water and air permeability, wear resistance, corrosion resistance, acid and alkali resistance, high temperature resistance, not easy to deformation, long life and other characteristics, can be used in copper, aluminum, zinc, alloy and other solutions! The inner diameter of the furnace hole through the silicon carbide tube should be 1.4 to 1.6 times the outer diameter of the cold end, and the furnace hole is too small or the filling in the hole is too tight, which obstructs the free expansion of the silicon carbide tube at high temperature and causes the rod to break. During installation, when the silicon carbide tube passes through the rod holes on both sides of the furnace wall, it should be freely rotated 360 degrees to prevent forced installation and beating. Before loading the rod, an iron tube with the diameter of the silicon carbide tube can be used for trial installation. The higher use temperature of silicon carbon tube is 1600, which can not be used for a long time. The normal operating temperature is 1450 degrees

 

Matter Needing Attention

1, silicon carbide pipe texture is hard and brittle, thread with limited elasticity, installation and disassembly should be fully careful attention,

2, life and the use of temperature is very much related, generally in 1300℃±50℃ can run 1500 working hours.

3, the heated material can not contain too much water, otherwise it will affect the life of the silicon carbon tube

4, silicon carbon tube is not suitable for working in a protective atmosphere, such as hydrogen. Thus affect the life of silicon carbide tube.

5the selection of the surface load of the silicon carbon tube changes with the temperature, and the selection of the appropriate heating power can extend the life of the silicon 

carbon tube.

6, the silicon carbide tube should be cleaned between the internal and external furnace tubes before installation. Remove the debris between the threads of the silicon carbide pipe or that can cause short circuit, the conductive clip connection sheet should be tightly tightened, and the insulation sheet should be reliably insulated.

 7, the installation can be electric oven, long-term need not use before also must oven,

8, spare silicon carbon tube should be placed in a dry, no atmosphere erosion place, to prevent aluminized end delixing.

SiC thermocouple protection tube Recommended Sizes

OD(mm)	ID(mm)	Length(mm)
16	8	300-600
22	12	300-800
28	16	300-1200
30	18	300-1000
45	25	300-1000

 

About Us

1. Our company is a high & new technology enterprise specially engaged in developing, manufacturing and selling SiC (silicon carbide) heating elements and  Molybdenum disilicide (Mosi2) heating elements and silicon carbide protective pipes and carbon fiber rod

2. It established in the year 2007, with more than 16 years experience for produciton.

3. Products are exported to USA, Germany, France, Poland, Spain,Turkey, Russia, Ukraine, Japan, Korea, Singapore, Vietnam, Thailand and Iran, etc.. They are highly approved by our customers all over the world.

 

 

 

Product Image